[][src]Struct futures::stream::Wait

#[must_use = "iterators do nothing unless advanced"]
pub struct Wait<S> { /* fields omitted */ }

A stream combinator which converts an asynchronous stream to a blocking iterator.

Created by the Stream::wait method, this function transforms any stream into a standard iterator. This is implemented by blocking the current thread while items on the underlying stream aren't ready yet.

Methods

impl<S> Wait<S>[src]

pub fn get_ref(&self) -> &S[src]

Acquires a reference to the underlying stream that this combinator is pulling from.

pub fn get_mut(&mut self) -> &mut S[src]

Acquires a mutable reference to the underlying stream that this combinator is pulling from.

Note that care must be taken to avoid tampering with the state of the stream which may otherwise confuse this combinator.

pub fn into_inner(self) -> S[src]

Consumes this combinator, returning the underlying stream.

Note that this may discard intermediate state of this combinator, so care should be taken to avoid losing resources when this is called.

Trait Implementations

impl<S: Debug> Debug for Wait<S>[src]

impl<S: Stream> Iterator for Wait<S>[src]

type Item = Result<S::Item, S::Error>

The type of the elements being iterated over.

fn size_hint(&self) -> (usize, Option<usize>)1.0.0[src]

Returns the bounds on the remaining length of the iterator. Read more

fn count(self) -> usize1.0.0[src]

Consumes the iterator, counting the number of iterations and returning it. Read more

fn last(self) -> Option<Self::Item>1.0.0[src]

Consumes the iterator, returning the last element. Read more

fn nth(&mut self, n: usize) -> Option<Self::Item>1.0.0[src]

Returns the nth element of the iterator. Read more

fn step_by(self, step: usize) -> StepBy<Self>1.28.0[src]

Creates an iterator starting at the same point, but stepping by the given amount at each iteration. Read more

fn chain<U>(self, other: U) -> Chain<Self, <U as IntoIterator>::IntoIter> where
    U: IntoIterator<Item = Self::Item>, 
1.0.0[src]

Takes two iterators and creates a new iterator over both in sequence. Read more

fn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter> where
    U: IntoIterator
1.0.0[src]

'Zips up' two iterators into a single iterator of pairs. Read more

fn map<B, F>(self, f: F) -> Map<Self, F> where
    F: FnMut(Self::Item) -> B, 
1.0.0[src]

Takes a closure and creates an iterator which calls that closure on each element. Read more

fn for_each<F>(self, f: F) where
    F: FnMut(Self::Item), 
1.21.0[src]

Calls a closure on each element of an iterator. Read more

fn filter<P>(self, predicate: P) -> Filter<Self, P> where
    P: FnMut(&Self::Item) -> bool
1.0.0[src]

Creates an iterator which uses a closure to determine if an element should be yielded. Read more

fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F> where
    F: FnMut(Self::Item) -> Option<B>, 
1.0.0[src]

Creates an iterator that both filters and maps. Read more

fn enumerate(self) -> Enumerate<Self>1.0.0[src]

Creates an iterator which gives the current iteration count as well as the next value. Read more

fn peekable(self) -> Peekable<Self>1.0.0[src]

Creates an iterator which can use peek to look at the next element of the iterator without consuming it. Read more

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P> where
    P: FnMut(&Self::Item) -> bool
1.0.0[src]

Creates an iterator that [skip]s elements based on a predicate. Read more

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P> where
    P: FnMut(&Self::Item) -> bool
1.0.0[src]

Creates an iterator that yields elements based on a predicate. Read more

fn skip(self, n: usize) -> Skip<Self>1.0.0[src]

Creates an iterator that skips the first n elements. Read more

fn take(self, n: usize) -> Take<Self>1.0.0[src]

Creates an iterator that yields its first n elements. Read more

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F> where
    F: FnMut(&mut St, Self::Item) -> Option<B>, 
1.0.0[src]

An iterator adaptor similar to [fold] that holds internal state and produces a new iterator. Read more

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> where
    F: FnMut(Self::Item) -> U,
    U: IntoIterator
1.0.0[src]

Creates an iterator that works like map, but flattens nested structure. Read more

fn flatten(self) -> Flatten<Self> where
    Self::Item: IntoIterator
1.29.0[src]

Creates an iterator that flattens nested structure. Read more

fn fuse(self) -> Fuse<Self>1.0.0[src]

Creates an iterator which ends after the first [None]. Read more

fn inspect<F>(self, f: F) -> Inspect<Self, F> where
    F: FnMut(&Self::Item), 
1.0.0[src]

Do something with each element of an iterator, passing the value on. Read more

fn by_ref(&mut self) -> &mut Self1.0.0[src]

Borrows an iterator, rather than consuming it. Read more

#[must_use = "if you really need to exhaust the iterator, consider `.for_each(drop)` instead"]
fn collect<B>(self) -> B where
    B: FromIterator<Self::Item>, 
1.0.0[src]

Transforms an iterator into a collection. Read more

fn partition<B, F>(self, f: F) -> (B, B) where
    B: Default + Extend<Self::Item>,
    F: FnMut(&Self::Item) -> bool
1.0.0[src]

Consumes an iterator, creating two collections from it. Read more

fn try_fold<B, F, R>(&mut self, init: B, f: F) -> R where
    F: FnMut(B, Self::Item) -> R,
    R: Try<Ok = B>, 
1.27.0[src]

An iterator method that applies a function as long as it returns successfully, producing a single, final value. Read more

fn try_for_each<F, R>(&mut self, f: F) -> R where
    F: FnMut(Self::Item) -> R,
    R: Try<Ok = ()>, 
1.27.0[src]

An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error. Read more

fn fold<B, F>(self, init: B, f: F) -> B where
    F: FnMut(B, Self::Item) -> B, 
1.0.0[src]

An iterator method that applies a function, producing a single, final value. Read more

fn all<F>(&mut self, f: F) -> bool where
    F: FnMut(Self::Item) -> bool
1.0.0[src]

Tests if every element of the iterator matches a predicate. Read more

fn any<F>(&mut self, f: F) -> bool where
    F: FnMut(Self::Item) -> bool
1.0.0[src]

Tests if any element of the iterator matches a predicate. Read more

fn find<P>(&mut self, predicate: P) -> Option<Self::Item> where
    P: FnMut(&Self::Item) -> bool
1.0.0[src]

Searches for an element of an iterator that satisfies a predicate. Read more

fn find_map<B, F>(&mut self, f: F) -> Option<B> where
    F: FnMut(Self::Item) -> Option<B>, 
1.30.0[src]

Applies function to the elements of iterator and returns the first non-none result. Read more

fn position<P>(&mut self, predicate: P) -> Option<usize> where
    P: FnMut(Self::Item) -> bool
1.0.0[src]

Searches for an element in an iterator, returning its index. Read more

fn rposition<P>(&mut self, predicate: P) -> Option<usize> where
    P: FnMut(Self::Item) -> bool,
    Self: ExactSizeIterator + DoubleEndedIterator
1.0.0[src]

Searches for an element in an iterator from the right, returning its index. Read more

fn max(self) -> Option<Self::Item> where
    Self::Item: Ord
1.0.0[src]

Returns the maximum element of an iterator. Read more

fn min(self) -> Option<Self::Item> where
    Self::Item: Ord
1.0.0[src]

Returns the minimum element of an iterator. Read more

fn max_by_key<B, F>(self, f: F) -> Option<Self::Item> where
    B: Ord,
    F: FnMut(&Self::Item) -> B, 
1.6.0[src]

Returns the element that gives the maximum value from the specified function. Read more

fn max_by<F>(self, compare: F) -> Option<Self::Item> where
    F: FnMut(&Self::Item, &Self::Item) -> Ordering
1.15.0[src]

Returns the element that gives the maximum value with respect to the specified comparison function. Read more

fn min_by_key<B, F>(self, f: F) -> Option<Self::Item> where
    B: Ord,
    F: FnMut(&Self::Item) -> B, 
1.6.0[src]

Returns the element that gives the minimum value from the specified function. Read more

fn min_by<F>(self, compare: F) -> Option<Self::Item> where
    F: FnMut(&Self::Item, &Self::Item) -> Ordering
1.15.0[src]

Returns the element that gives the minimum value with respect to the specified comparison function. Read more

fn rev(self) -> Rev<Self> where
    Self: DoubleEndedIterator
1.0.0[src]

Reverses an iterator's direction. Read more

fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB) where
    FromA: Default + Extend<A>,
    FromB: Default + Extend<B>,
    Self: Iterator<Item = (A, B)>, 
1.0.0[src]

Converts an iterator of pairs into a pair of containers. Read more

fn copied<'a, T>(self) -> Copied<Self> where
    Self: Iterator<Item = &'a T>,
    T: 'a + Copy
1.36.0[src]

Creates an iterator which copies all of its elements. Read more

fn cloned<'a, T>(self) -> Cloned<Self> where
    Self: Iterator<Item = &'a T>,
    T: 'a + Clone
1.0.0[src]

Creates an iterator which [clone]s all of its elements. Read more

fn cycle(self) -> Cycle<Self> where
    Self: Clone
1.0.0[src]

Repeats an iterator endlessly. Read more

fn sum<S>(self) -> S where
    S: Sum<Self::Item>, 
1.11.0[src]

Sums the elements of an iterator. Read more

fn product<P>(self) -> P where
    P: Product<Self::Item>, 
1.11.0[src]

Iterates over the entire iterator, multiplying all the elements Read more

fn cmp<I>(self, other: I) -> Ordering where
    I: IntoIterator<Item = Self::Item>,
    Self::Item: Ord
1.5.0[src]

Lexicographically compares the elements of this Iterator with those of another. Read more

fn partial_cmp<I>(self, other: I) -> Option<Ordering> where
    I: IntoIterator,
    Self::Item: PartialOrd<<I as IntoIterator>::Item>, 
1.5.0[src]

Lexicographically compares the elements of this Iterator with those of another. Read more

fn eq<I>(self, other: I) -> bool where
    I: IntoIterator,
    Self::Item: PartialEq<<I as IntoIterator>::Item>, 
1.5.0[src]

Determines if the elements of this Iterator are equal to those of another. Read more

fn ne<I>(self, other: I) -> bool where
    I: IntoIterator,
    Self::Item: PartialEq<<I as IntoIterator>::Item>, 
1.5.0[src]

Determines if the elements of this Iterator are unequal to those of another. Read more

fn lt<I>(self, other: I) -> bool where
    I: IntoIterator,
    Self::Item: PartialOrd<<I as IntoIterator>::Item>, 
1.5.0[src]

Determines if the elements of this Iterator are lexicographically less than those of another. Read more

fn le<I>(self, other: I) -> bool where
    I: IntoIterator,
    Self::Item: PartialOrd<<I as IntoIterator>::Item>, 
1.5.0[src]

Determines if the elements of this Iterator are lexicographically less or equal to those of another. Read more

fn gt<I>(self, other: I) -> bool where
    I: IntoIterator,
    Self::Item: PartialOrd<<I as IntoIterator>::Item>, 
1.5.0[src]

Determines if the elements of this Iterator are lexicographically greater than those of another. Read more

fn ge<I>(self, other: I) -> bool where
    I: IntoIterator,
    Self::Item: PartialOrd<<I as IntoIterator>::Item>, 
1.5.0[src]

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another. Read more

fn is_sorted(self) -> bool where
    Self::Item: PartialOrd<Self::Item>, 
[src]

🔬 This is a nightly-only experimental API. (is_sorted)

new API

Checks if the elements of this iterator are sorted. Read more

fn is_sorted_by<F>(self, compare: F) -> bool where
    F: FnMut(&Self::Item, &Self::Item) -> Option<Ordering>, 
[src]

🔬 This is a nightly-only experimental API. (is_sorted)

new API

Checks if the elements of this iterator are sorted using the given comparator function. Read more

fn is_sorted_by_key<F, K>(self, f: F) -> bool where
    F: FnMut(&Self::Item) -> K,
    K: PartialOrd<K>, 
[src]

🔬 This is a nightly-only experimental API. (is_sorted)

new API

Checks if the elements of this iterator are sorted using the given key extraction function. Read more

Auto Trait Implementations

impl<S> Send for Wait<S> where
    S: Send

impl<S> !Sync for Wait<S>

Blanket Implementations

impl<T> From<T> for T[src]

impl<T, U> TryFrom<U> for T where
    U: Into<T>, 
[src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<I> IntoIterator for I where
    I: Iterator
[src]

type Item = <I as Iterator>::Item

The type of the elements being iterated over.

type IntoIter = I

Which kind of iterator are we turning this into?

impl<T, U> Into<U> for T where
    U: From<T>, 
[src]

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>, 
[src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

impl<T> Borrow<T> for T where
    T: ?Sized
[src]

impl<T> BorrowMut<T> for T where
    T: ?Sized
[src]

impl<T> Any for T where
    T: 'static + ?Sized
[src]