[−]Struct nix::sys::mman::MapFlags
Additional parameters for mmap()
.
Methods
impl MapFlags
pub const MAP_FILE: MapFlags
Compatibility flag. Ignored.
pub const MAP_SHARED: MapFlags
Share this mapping. Mutually exclusive with MAP_PRIVATE
.
pub const MAP_PRIVATE: MapFlags
Create a private copy-on-write mapping. Mutually exclusive with MAP_SHARED
.
pub const MAP_FIXED: MapFlags
Place the mapping at exactly the address specified in addr
.
pub const MAP_ANON: MapFlags
Synonym for MAP_ANONYMOUS
.
pub const MAP_ANONYMOUS: MapFlags
The mapping is not backed by any file.
pub const MAP_32BIT: MapFlags
Put the mapping into the first 2GB of the process address space.
pub const MAP_GROWSDOWN: MapFlags
Used for stacks; indicates to the kernel that the mapping should extend downward in memory.
pub const MAP_DENYWRITE: MapFlags
Compatibility flag. Ignored.
pub const MAP_EXECUTABLE: MapFlags
Compatibility flag. Ignored.
pub const MAP_LOCKED: MapFlags
Mark the mmaped region to be locked in the same way as mlock(2)
.
pub const MAP_NORESERVE: MapFlags
Do not reserve swap space for this mapping.
This was removed in FreeBSD 11.
pub const MAP_POPULATE: MapFlags
Populate page tables for a mapping.
pub const MAP_NONBLOCK: MapFlags
Only meaningful when used with MAP_POPULATE
. Don't perform read-ahead.
pub const MAP_HUGETLB: MapFlags
Allocate the mapping using "huge pages."
pub const MAP_STACK: MapFlags
Region grows down, like a stack.
pub const fn empty() -> MapFlags
Returns an empty set of flags
pub const fn all() -> MapFlags
Returns the set containing all flags.
pub const fn bits(&self) -> c_int
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: c_int) -> Option<MapFlags>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: c_int) -> MapFlags
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub const fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub const fn intersects(&self, other: MapFlags) -> bool
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: MapFlags) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: MapFlags)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: MapFlags)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: MapFlags)
Toggles the specified flags in-place.
pub fn set(&mut self, other: MapFlags, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Extend<MapFlags> for MapFlags
fn extend<T: IntoIterator<Item = MapFlags>>(&mut self, iterator: T)
impl Clone for MapFlags
fn clone(&self) -> MapFlags
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl Ord for MapFlags
fn cmp(&self, other: &MapFlags) -> Ordering
fn max(self, other: Self) -> Self
1.21.0[src]
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
Compares and returns the minimum of two values. Read more
fn clamp(self, min: Self, max: Self) -> Self
[src]
clamp
)Restrict a value to a certain interval. Read more
impl Copy for MapFlags
impl Eq for MapFlags
impl PartialOrd<MapFlags> for MapFlags
fn partial_cmp(&self, other: &MapFlags) -> Option<Ordering>
fn lt(&self, other: &MapFlags) -> bool
fn le(&self, other: &MapFlags) -> bool
fn gt(&self, other: &MapFlags) -> bool
fn ge(&self, other: &MapFlags) -> bool
impl PartialEq<MapFlags> for MapFlags
impl Debug for MapFlags
impl Sub<MapFlags> for MapFlags
type Output = MapFlags
The resulting type after applying the -
operator.
fn sub(self, other: MapFlags) -> MapFlags
Returns the set difference of the two sets of flags.
impl SubAssign<MapFlags> for MapFlags
fn sub_assign(&mut self, other: MapFlags)
Disables all flags enabled in the set.
impl Not for MapFlags
type Output = MapFlags
The resulting type after applying the !
operator.
fn not(self) -> MapFlags
Returns the complement of this set of flags.
impl BitAnd<MapFlags> for MapFlags
type Output = MapFlags
The resulting type after applying the &
operator.
fn bitand(self, other: MapFlags) -> MapFlags
Returns the intersection between the two sets of flags.
impl BitOr<MapFlags> for MapFlags
type Output = MapFlags
The resulting type after applying the |
operator.
fn bitor(self, other: MapFlags) -> MapFlags
Returns the union of the two sets of flags.
impl BitXor<MapFlags> for MapFlags
type Output = MapFlags
The resulting type after applying the ^
operator.
fn bitxor(self, other: MapFlags) -> MapFlags
Returns the left flags, but with all the right flags toggled.
impl BitAndAssign<MapFlags> for MapFlags
fn bitand_assign(&mut self, other: MapFlags)
Disables all flags disabled in the set.
impl BitOrAssign<MapFlags> for MapFlags
fn bitor_assign(&mut self, other: MapFlags)
Adds the set of flags.
impl BitXorAssign<MapFlags> for MapFlags
fn bitxor_assign(&mut self, other: MapFlags)
Toggles the set of flags.
impl Hash for MapFlags
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl FromIterator<MapFlags> for MapFlags
fn from_iter<T: IntoIterator<Item = MapFlags>>(iterator: T) -> MapFlags
impl Octal for MapFlags
impl Binary for MapFlags
impl LowerHex for MapFlags
impl UpperHex for MapFlags
Auto Trait Implementations
Blanket Implementations
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T
[src]
fn clone_into(&self, target: &mut T)
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,