[][src]Struct tokio_io::io::ReadHalf

pub struct ReadHalf<T> { /* fields omitted */ }

The readable half of an object returned from AsyncRead::split.

Methods

impl<T: AsyncRead + AsyncWrite> ReadHalf<T>[src]

pub fn unsplit(self, w: WriteHalf<T>) -> T[src]

Reunite with a previously split WriteHalf.

Panics

If this ReadHalf and the given WriteHalf do not originate from the same AsyncRead::split operation this method will panic.

Trait Implementations

impl<T: AsyncRead> AsyncRead for ReadHalf<T>[src]

unsafe fn prepare_uninitialized_buffer(&self, buf: &mut [u8]) -> bool[src]

Prepares an uninitialized buffer to be safe to pass to read. Returns true if the supplied buffer was zeroed out. Read more

fn poll_read(&mut self, buf: &mut [u8]) -> Poll<usize, Error>[src]

Attempt to read from the AsyncRead into buf. Read more

fn framed<T: Encoder + Decoder>(self, codec: T) -> Framed<Self, T> where
    Self: AsyncWrite + Sized
[src]

Deprecated since 0.1.7:

Use tokio_codec::Decoder::framed instead

Provides a Stream and Sink interface for reading and writing to this I/O object, using Decode and Encode to read and write the raw data. Read more

fn split(self) -> (ReadHalf<Self>, WriteHalf<Self>) where
    Self: AsyncWrite + Sized
[src]

Helper method for splitting this read/write object into two halves. Read more

impl<T: Debug> Debug for ReadHalf<T>[src]

impl<T: AsyncRead> Read for ReadHalf<T>[src]

fn read_vectored(&mut self, bufs: &mut [IoSliceMut]) -> Result<usize, Error>1.36.0[src]

Like read, except that it reads into a slice of buffers. Read more

unsafe fn initializer(&self) -> Initializer[src]

🔬 This is a nightly-only experimental API. (read_initializer)

Determines if this Reader can work with buffers of uninitialized memory. Read more

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>1.0.0[src]

Read all bytes until EOF in this source, placing them into buf. Read more

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>1.0.0[src]

Read all bytes until EOF in this source, appending them to buf. Read more

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>1.6.0[src]

Read the exact number of bytes required to fill buf. Read more

fn by_ref(&mut self) -> &mut Self1.0.0[src]

Creates a "by reference" adaptor for this instance of Read. Read more

fn bytes(self) -> Bytes<Self>1.0.0[src]

Transforms this Read instance to an [Iterator] over its bytes. Read more

fn chain<R>(self, next: R) -> Chain<Self, R> where
    R: Read
1.0.0[src]

Creates an adaptor which will chain this stream with another. Read more

fn take(self, limit: u64) -> Take<Self>1.0.0[src]

Creates an adaptor which will read at most limit bytes from it. Read more

Auto Trait Implementations

impl<T> Send for ReadHalf<T> where
    T: Send

impl<T> Sync for ReadHalf<T> where
    T: Send

Blanket Implementations

impl<T> From<T> for T[src]

impl<T, U> Into<U> for T where
    U: From<T>, 
[src]

impl<T, U> TryFrom<U> for T where
    U: Into<T>, 
[src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>, 
[src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

impl<T> BorrowMut<T> for T where
    T: ?Sized
[src]

impl<T> Borrow<T> for T where
    T: ?Sized
[src]

impl<T> Any for T where
    T: 'static + ?Sized
[src]

impl<R> ReadBytesExt for R where
    R: Read + ?Sized
[src]

fn read_u8(&mut self) -> Result<u8, Error>[src]

Reads an unsigned 8 bit integer from the underlying reader. Read more

fn read_i8(&mut self) -> Result<i8, Error>[src]

Reads a signed 8 bit integer from the underlying reader. Read more

fn read_u16<T>(&mut self) -> Result<u16, Error> where
    T: ByteOrder
[src]

Reads an unsigned 16 bit integer from the underlying reader. Read more

fn read_i16<T>(&mut self) -> Result<i16, Error> where
    T: ByteOrder
[src]

Reads a signed 16 bit integer from the underlying reader. Read more

fn read_u24<T>(&mut self) -> Result<u32, Error> where
    T: ByteOrder
[src]

Reads an unsigned 24 bit integer from the underlying reader. Read more

fn read_i24<T>(&mut self) -> Result<i32, Error> where
    T: ByteOrder
[src]

Reads a signed 24 bit integer from the underlying reader. Read more

fn read_u32<T>(&mut self) -> Result<u32, Error> where
    T: ByteOrder
[src]

Reads an unsigned 32 bit integer from the underlying reader. Read more

fn read_i32<T>(&mut self) -> Result<i32, Error> where
    T: ByteOrder
[src]

Reads a signed 32 bit integer from the underlying reader. Read more

fn read_u48<T>(&mut self) -> Result<u64, Error> where
    T: ByteOrder
[src]

Reads an unsigned 48 bit integer from the underlying reader. Read more

fn read_i48<T>(&mut self) -> Result<i64, Error> where
    T: ByteOrder
[src]

Reads a signed 48 bit integer from the underlying reader. Read more

fn read_u64<T>(&mut self) -> Result<u64, Error> where
    T: ByteOrder
[src]

Reads an unsigned 64 bit integer from the underlying reader. Read more

fn read_i64<T>(&mut self) -> Result<i64, Error> where
    T: ByteOrder
[src]

Reads a signed 64 bit integer from the underlying reader. Read more

fn read_u128<T>(&mut self) -> Result<u128, Error> where
    T: ByteOrder
[src]

Reads an unsigned 128 bit integer from the underlying reader. Read more

fn read_i128<T>(&mut self) -> Result<i128, Error> where
    T: ByteOrder
[src]

Reads a signed 128 bit integer from the underlying reader. Read more

fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
    T: ByteOrder
[src]

Reads an unsigned n-bytes integer from the underlying reader. Read more

fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
    T: ByteOrder
[src]

Reads a signed n-bytes integer from the underlying reader. Read more

fn read_uint128<T>(&mut self, nbytes: usize) -> Result<u128, Error> where
    T: ByteOrder
[src]

Reads an unsigned n-bytes integer from the underlying reader.

fn read_int128<T>(&mut self, nbytes: usize) -> Result<i128, Error> where
    T: ByteOrder
[src]

Reads a signed n-bytes integer from the underlying reader.

fn read_f32<T>(&mut self) -> Result<f32, Error> where
    T: ByteOrder
[src]

Reads a IEEE754 single-precision (4 bytes) floating point number from the underlying reader. Read more

fn read_f64<T>(&mut self) -> Result<f64, Error> where
    T: ByteOrder
[src]

Reads a IEEE754 double-precision (8 bytes) floating point number from the underlying reader. Read more

fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where
    T: ByteOrder
[src]

Reads a sequence of unsigned 16 bit integers from the underlying reader. Read more

fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error> where
    T: ByteOrder
[src]

Reads a sequence of unsigned 32 bit integers from the underlying reader. Read more

fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error> where
    T: ByteOrder
[src]

Reads a sequence of unsigned 64 bit integers from the underlying reader. Read more

fn read_u128_into<T>(&mut self, dst: &mut [u128]) -> Result<(), Error> where
    T: ByteOrder
[src]

Reads a sequence of unsigned 128 bit integers from the underlying reader. Read more

fn read_i8_into(&mut self, dst: &mut [i8]) -> Result<(), Error>[src]

Reads a sequence of signed 8 bit integers from the underlying reader. Read more

fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error> where
    T: ByteOrder
[src]

Reads a sequence of signed 16 bit integers from the underlying reader. Read more

fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error> where
    T: ByteOrder
[src]

Reads a sequence of signed 32 bit integers from the underlying reader. Read more

fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error> where
    T: ByteOrder
[src]

Reads a sequence of signed 64 bit integers from the underlying reader. Read more

fn read_i128_into<T>(&mut self, dst: &mut [i128]) -> Result<(), Error> where
    T: ByteOrder
[src]

Reads a sequence of signed 128 bit integers from the underlying reader. Read more

fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
    T: ByteOrder
[src]

Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader. Read more

fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
    T: ByteOrder
[src]

Deprecated since 1.2.0:

please use read_f32_into instead

DEPRECATED. Read more

fn read_f64_into<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
    T: ByteOrder
[src]

Reads a sequence of IEEE754 double-precision (8 bytes) floating point numbers from the underlying reader. Read more

fn read_f64_into_unchecked<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
    T: ByteOrder
[src]

Deprecated since 1.2.0:

please use read_f64_into instead

DEPRECATED. Read more