Struct tokio_serial::Serial

pub struct Serial { /* fields omitted */ }

Serial port I/O struct.

Methods

impl Serial

pub fn from_path<P>(path: P, settings: &SerialPortSettings) -> Result<Serial> where
    P: AsRef<Path>, 

Open serial port from a provided path, using the default reactor.

pub fn from_path_with_handle<P>(
    path: P,
    settings: &SerialPortSettings,
    handle: &Handle
) -> Result<Serial> where
    P: AsRef<Path>, 

Open serial port from a provided path, using the specified reactor.

pub fn pair() -> Result<(Self, Self)>

Create a pair of pseudo serial terminals using the default reactor

Returns

Two connected, unnamed Serial objects.

Errors

Attempting any IO or parameter settings on the slave tty after the master tty is closed will return errors.

pub fn pair_with_handle(handle: &Handle) -> Result<(Self, Self)>

Create a pair of pseudo serial terminals using the specified reactor.

Returns

Two connected, unnamed Serial objects.

Errors

Attempting any IO or parameter settings on the slave tty after the master tty is closed will return errors.

pub fn set_exclusive(&mut self, exclusive: bool) -> Result<()>

Sets the exclusivity of the port

If a port is exclusive, then trying to open the same device path again will fail.

See the man pages for the tiocexcl and tiocnxcl ioctl's for more details.

Errors

• Io for any error while setting exclusivity for the port.

pub fn exclusive(&self) -> bool

Returns the exclusivity of the port

If a port is exclusive, then trying to open the same device path again will fail.

Trait Implementations

impl Write for Serial

fn write(&mut self, buf: &[u8]) -> Result<usize>

Write a buffer into this writer, returning how many bytes were written.

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination.

fn write_vectored(&mut self, bufs: &[IoSlice]) -> Result<usize, Error>

Like write, except that it writes from a slice of buffers.

fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>

Attempts to write an entire buffer into this writer.

fn write_fmt(&mut self, fmt: Arguments) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Write.

impl Read for Serial

fn read(&mut self, buf: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut]) -> Result<usize, Error>

Like read, except that it reads into a slice of buffers.

unsafe fn initializer(&self) -> Initializer

🔬 This is a nightly-only experimental API. (read_initializer)

Determines if this Reader can work with buffers of uninitialized memory.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>

Read all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Read the exact number of bytes required to fill buf.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

Transforms this Read instance to an [Iterator] over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R> where
    R: Read, 

Creates an adaptor which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

Creates an adaptor which will read at most limit bytes from it.

impl AsRawFd for Serial

fn as_raw_fd(&self) -> RawFd

Extracts the raw file descriptor.

impl AsyncRead for Serial

fn poll_read(&mut self, buf: &mut [u8]) -> Result<Async<usize>>

Attempt to read from the AsyncRead into buf.

unsafe fn prepare_uninitialized_buffer(&self, buf: &mut [u8]) -> bool

Prepares an uninitialized buffer to be safe to pass to read. Returns true if the supplied buffer was zeroed out.

fn read_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error> where
    B: BufMut, 

Pull some bytes from this source into the specified BufMut, returning how many bytes were read.

fn framed<T>(self, codec: T) -> Framed<Self, T> where
    Self: AsyncWrite,
    T: Decoder + Encoder, 

Deprecated since 0.1.7:

Use tokio_codec::Decoder::framed instead

Provides a Stream and Sink interface for reading and writing to this I/O object, using Decode and Encode to read and write the raw data.

fn split(self) -> (ReadHalf<Self>, WriteHalf<Self>) where
    Self: AsyncWrite, 

Helper method for splitting this read/write object into two halves.

impl AsyncWrite for Serial

fn poll_write(&mut self, buf: &[u8]) -> Result<Async<usize>>

Attempt to write bytes from buf into the object.

fn shutdown(&mut self) -> Poll<(), Error>

Initiates or attempts to shut down this writer, returning success when the I/O connection has completely shut down.

fn poll_flush(&mut self) -> Result<Async<()>, Error>

Attempt to flush the object, ensuring that any buffered data reach their destination.

fn write_buf<B>(&mut self, buf: &mut B) -> Result<Async<usize>, Error> where
    B: Buf, 

Write a Buf into this value, returning how many bytes were written.

impl SerialPort for Serial

fn settings(&self) -> SerialPortSettings

Returns a struct with the current port settings

fn name(&self) -> Option<String>

Returns the name of this port if it exists.

fn baud_rate(&self) -> Result<u32>

Returns the current baud rate.

fn data_bits(&self) -> Result<DataBits>

Returns the character size.

fn flow_control(&self) -> Result<FlowControl>

Returns the flow control mode.

fn parity(&self) -> Result<Parity>

Returns the parity-checking mode.

fn stop_bits(&self) -> Result<StopBits>

Returns the number of stop bits.

fn timeout(&self) -> Duration

Returns the current timeout.

fn set_all(&mut self, settings: &SerialPortSettings) -> Result<()>

Applies all settings for a struct. This isn't guaranteed to involve only a single call into the driver, though that may be done on some platforms.

fn set_baud_rate(&mut self, baud_rate: u32) -> Result<()>

Sets the baud rate.

fn set_data_bits(&mut self, data_bits: DataBits) -> Result<()>

Sets the character size.

fn set_flow_control(&mut self, flow_control: FlowControl) -> Result<()>

Sets the flow control mode.

fn set_parity(&mut self, parity: Parity) -> Result<()>

Sets the parity-checking mode.

fn set_stop_bits(&mut self, stop_bits: StopBits) -> Result<()>

Sets the number of stop bits.

fn set_timeout(&mut self, _: Duration) -> Result<()>

Sets the timeout for future I/O operations.

fn write_request_to_send(&mut self, level: bool) -> Result<()>

Sets the state of the RTS (Request To Send) control signal.

fn write_data_terminal_ready(&mut self, level: bool) -> Result<()>

Writes to the Data Terminal Ready pin

fn read_clear_to_send(&mut self) -> Result<bool>

Reads the state of the CTS (Clear To Send) control signal.

fn read_data_set_ready(&mut self) -> Result<bool>

Reads the state of the Data Set Ready control signal.

fn read_ring_indicator(&mut self) -> Result<bool>

Reads the state of the Ring Indicator control signal.

fn read_carrier_detect(&mut self) -> Result<bool>

Reads the state of the Carrier Detect control signal.

fn bytes_to_read(&self) -> Result<u32>

Gets the number of bytes available to be read from the input buffer.

fn bytes_to_write(&self) -> Result<u32>

Get the number of bytes written to the output buffer, awaiting transmission.

fn clear(&self, buffer_to_clear: ClearBuffer) -> Result<()>

Discards all bytes from the serial driver's input buffer and/or output buffer.

fn try_clone(&self) -> Result<Box<dyn SerialPort>>

Attempts to clone the SerialPort. This allow you to write and read simultaneously from the same serial connection. Please note that if you want a real asynchronous serial port you should look at mio-serial or tokio-serial.